Canon 2213C002 Instruction Manual page 134

Selecting a Network Connection and Changing Network Settings
Selecting a Network Connection and Changing Network Settings
Operating modes:
134
Selecting a Network Connection
You can save up to 4 network configuration profiles. If you just saved a new network configuration, it will already
be automatically selected so follow this procedure to select a different configuration profile.
1 Select [Connection Settings].
> [B ! System Setup] > [Network Settings] > [Connection Settings]
2 Select the desired network configuration profile.
Network configuration profile ([1:] to [4:]) > [L] > [X]
Changing Network Settings
You can check and, if necessary, edit the settings of the currently selected network configuration profile even
after the initial setup. Changing settings manually requires more advanced knowledge of Wi-Fi and network
settings.
1 Select [Connection Settings].
> [B ! System Setup] > [Network Settings] > [Connection Settings]
2 Select the desired network configuration profile.
Network configuration profile ([1:] to [4:]) > [i]
• The current network settings will be displayed. Drag your finger up/down or touch [Í]/[Î] to scroll and
review all the information.
3 To change the network settings, touch [Edit] and then [Infrastructure], [Camera Access Point] or
[Ethernet].
• Change the network settings as described in the previous sections.
Infrastrucure connections (A 129, from step 3)
Camera Access Point connections (A 128, from step 3)
Ethernet connections: Connect the network device (step 1, A 133) and change the IP settings (A 129).