Canon 2213C002 Instruction Manual page 20

Preparing the Power Supply
6 Charging will start.
• The POWER/CHG indicator will illuminate in red while the
battery is charging. The indicator will go out when charging is
completed. If the POWER/CHG indicator starts flashing, refer to
20
Troubleshooting (A 156).
7 When charging has completed, disconnect the AC adapter in the
order shown in the illustration.
To remove the battery pack
1 Slide the BATTERY RELEASE switch in the direction of the arrow
and hold it pressed down.
2 Slide the battery pack down and then pull it out.
POWER/CHG (battery charging) indicator
- 1
- 3
- 4