Canon 2213C002 Instruction Manual page 136

Browser Remote: Controlling the Camcorder from a Network Device
Starting Browser Remote
After completing the network connection, you can start the Browser Remote application on the Web browser* of
any network device** connected to the same network.
* A Web browser that supports JavaScript and is enabled to accept cookies is required.
136
**For details about compatible devices, operating systems, Web browsers, etc., please visit your local Canon website.
Preparations on the Camcorder
1 Select the desired network connection (A 134).
• Use a Camera Access Point connection or Ethernet network.
2 Activate the Browser Remote function.
> [B ! System Setup] > [Network Settings] > [Activate] > [Browser Remote]
• With Camera Access Point connections, the camcorder will start functioning as a wireless access point.
With Ethernet connections, connect the camcorder to the desired network using an Ethernet cable.
• The connection type icon and
camcorder is ready to accept commands from the Browser Remote application.
3 If necessary, display the camcorder's settings to complete the connection.
[L] > [View Information]
• The current Browser Remote and network settings will be displayed. If necessary, touch [Í]/[Î] to scroll
up/down.
• You will need the camcorder's SSID (network name) to connect a Wi-Fi device using a Camera Access Point
connection. You will need the camcorder's URL to use the Browser Remote application.
4 Touch [L] and then [X] to close the menu.
On the Network Device
1 Connect the network device to the camcorder.
• With Camera Access Point connections, select the camcorder's SSID (network name) in the Wi-Fi settings.
With Ethernet connections, connect the device to the same access point as the camcorder.
2 Start the Web browser on the network device.
3 Enter the camcorder's URL exactly as shown on the camcorder's
information screen.
• The Browser Remote screen will appear.
• While Browser Remote is correctly connected to the camcorder, the network
connection indicator's
• If the camcorder's ID was set, it will appear on the Browser Remote screen while live view is not activated.
will appear at the right of the screen. When the icons turn white, the
will keep turning on and off in a loop.