Canon 2213C002 Instruction Manual page 122

Audio Output
Audio Output
The camcorder can output audio from the SDI OUT terminal (m only), HDMI OUT terminal, × (headphone)
terminal or built-in mono speaker. When recording, or playing back clips recorded, with 4-channel audio, you
122
can select which audio channels will be output from the terminals and speaker.
Audio output configuration
MP4 audio format
[ LPCM 16bit 4CH]
[ AAC 16bit 2CH]
1 [3 Recording Setup] > [¸ Audio Format] setting.
2
You can select the audio channels that are output with the following procedure.
Operating modes:
Selecting the Audio Channels
1 Select [Monitor Channels] or [HDMI Channels] depending on the terminal you wish to use.
> [¡ #* Audio Setup] > [Monitor Channels] (headphones/speaker) or [HDMI Channels]
(HDMI OUT terminal)
*Page ! in
2 Touch the desired option and then touch [X].
Options
All of the following settings are available for [Monitor Channels]; only [
available for [HDMI channels].
Setting
[ƒ CH1/CH2]
[š CH1/CH1]
[Ÿ CH2/CH2]
[ CH1+2/CH1+2]
[ CH3/CH4]*
[ CH3/CH3]*
[ CH4/CH4]*
[ CH3+4/CH3+4]*
[ CH1+3/CH2+4]*
* In mode, these options are available only during 4-channel audio recording.
NOTES
• If you set an assignable button to [œ Monitor Channels] (A 98), you can press the button to change the
audio channels output from the × (headphone) terminal.
Audio configuration of the
1
recorded clips
4-channel linear PCM,
16 bit
2-channel MPEG-2 AAC-LC,
bit rate: 256 kbps
mode.
Audio output configuration
m SDI OUT terminal
4-channel linear PCM,
24 bit
ƒ
CH1/CH2] and [
Audio output
L
CH1
CH1
CH2
CH1+CH2 mixed
CH3
CH3
CH4
CH3+CH4 mixed
CH1+CH3 mixed
2
HDMI OUT terminal
2-channel linear PCM,
16 bit
CH3/CH4] are
R
CH2
CH1
CH2
CH1+CH2 mixed
CH4
CH3
CH4
CH3+CH4 mixed
CH2+CH4 mixed