Troubleshooting - Assa Abloy Besam SW100 Owner's Manual

Troubleshooting

8
Fault
The door does not open
- The motor does not start
- The motor starts
The door does not close
10
Possible reasons why
Control switch is set to OFF
Main power is missing
Presence detection is activated
Kill activated
Mechanical lock is locked
Something jammed beneath the door Remove object
Electric strike is binding
Control switch is set to HOLD
Presence impulse is activated
Something jammed beneath the door Remove object
Issue 2007-08-24
Troubleshooting
Remedies/Explanations
Change the setting of both control switches (ON)
Check the main power switch
Check that there are no objects in the detection
zone
Deactivate Kill
Unlock the lock
Adjust strike
Change the setting of the control switch
Remove objects in the detection zone
1003826-US-3.0