To Our Customers - Assa Abloy Besam SW100 Owner's Manual

2
2.1 Service availability
2.2 Compliance with safety standards
2.3 What you should know
1003826-US-3.0
The purpose of this manual is to familiarize you with your low energy automatic door
system. It is essential that you know the system and that you recognize the impor-
tance of maintaining your door system in compliance with the industry standards for
safety. It is your responsibility, as owner and caretaker of the equipment, to
inspect the operation of your door system on a daily basis to ensure that it is safe
for use by visitors, customers, and employees. This manual will provide you with a
description of the operation and maintenance requirements of your door. It also pro-
vides instructions for the Daily Safety Check.
Should the door fail to operate as described in the Daily Safety Check, or at any other
time for any other reason, do not attempt to repair or adjust the door. Discontinue
door operation immediately and secure door in a safe manner. Then call a quali-
fied Besam service technician. Besam technicians are trained to service your door in
accordance with applicable industry safety standards.
Besam products are distributed through a nationwide network of Besam authorized dis-
tributors for sales, installation and service. Should you need service on your door system,
visit www.besam.com and select "contact us" to search for a local authorized Besam tech-
nician. You can also contact Besam at 1-866-Besam-US.
Your door was designed to meet the latest operating and safety standards. In order to
ensure the continued safe operation of your door, it is important that:
• Your door system is maintained in compliance with the standards of the industry.
• Proper decals and labels are applied and maintained on your doors. If decals are
removed or cannot be read, request replacement decals when calling for service.
Be sure that a Besam office or distributor has provided the following for each door:
1. Instruction on how to conduct the Daily Safety Check (by walk-through example).
2. Location of switches and instruction in their use.
3. Circuit breaker or power disconnect location for each door system.
4. Discussion of problems that could result from door being allowed to operate after
a malfunction is observed.
5. Number to call for service or questions about your system if you are uncertain of
any condition or situation.
6. Warranty information for each door.
Issue 2007-08-24

To our customers

To our customers
5