Heartland VALUE Series Assembly Manual page 5

If you choose to install your kit on a concrete slab refer to the diagram below.
C
B
4" (10,2 cm)
Building Size
8' x 10' (243,8 x 304,8 cm)
Requires:
Allow new concrete slabs to cure for at least seven (7) days.
• A treated 2 x 4" (5,1 x 10,2 cm) sill plate is required when installing your shed on concrete. Hint: Use treated lumber in your kit
or purchase full length treated lumber.
• Use a high quality exterior grade caulk beneath all sill plates.
• Fasten 2 x 4" (5,1 x 10,2 cm) sill plates to slab using approved concrete anchors (fasteners not included).
• Check local code for concrete foundation requirements.
CONCRETE FOUNDATION
3-1/2"
(8,9 cm)
Actual Floor Size
8' x 9'-8-1/2" (243,8 x 295,9 cm)
x2
2 x 4 x 8' (5,1 x 10,2 x 243,8 cm)
x2
2 x 4 x 10' (5,1 x 10,2 x 305 cm)
x2
Caulk
Treated Sill Plate
A
116-1/2" (295,9 cm)
96" (243,8 cm)
MUST be treated lumber.
MUST be treated lumber.
NOTES
3
Caulk between sill plate
and concrete.
A
B
C
109-1/2" (278,1 cm)