Heartland VALUE Series Assembly Manual page 11

Before attaching fl oor decking, it is important to level and square the fl oor frame.
A level and square fl oor frame is required to correctly construct your shed.
BEGIN
1
See page 7 for the preferred fl oor leveling method.
2
Use level and check the frame is level before applying fl oor panels.
Check for frame squareness by measuring diagonally across corners. If the measurements are the
3
same, the frame is square. The diagonal measurement will be approximately 150-15/16" (383,4 cm).
4
When the frame is level and square secure one side of frame to the 4x4 runners using one fastener at
ends of each runner. At the opposite end of the frame, secure the frame to 4x4 runners with one fastener
at ends of each runner making sure the frame remains square (Fig. A).
FINISH
Once the fl oor frame is level and square fasten the frame at each point the frame contacts the 4x4
5
runners.
Second, secure at ends
with one fastener.
Fig. A
LEVEL AND SQUARE FLOOR FRAME
150-15/16"
(383,4 cm)
150-15/16"
(383,4 cm)
9
First, secure at ends
with one fastener.