Heartland VALUE Series Assembly Manual page 40

PARTS REQUIRED:
x4
3/8 x 1-3/4 x 71-1/4" (1 x 4,4 x 181 cm)
x4
3/8 x 1-3/4 x 71-3/4" (1 x 4,4 x 182,2 cm)
¸
BEGIN
1 Attach 71-3/4" trim fl ush to back of gable trim, bottom of roof panel and trim (Fig. A)
using 2" fi nish nails as shown.
2 Attach 71-1/4" trim fl ush to bottom of gable panel (Fig. B) and fl ush to edge
of 71-3/4" trim using one 2" fi nish nail as shown.
3
Finish attaching trim fl ush to corners (Fig. B) using six 2" (5,1 cm) fi nish nails as shown.
4 Repeat Steps 1-2 to attach trim to all four corners.
FINISH
5 You have attached your corner trim.
71-1/4"
Fig. A
CORNER TRIM
Flush
71-3/4"
x56
Fig. B
71-3/4"
38
2" (5,1 cm)
Flush Gable Trim
71-1/4"
71-1/4"