Write Community Name (Wr Com Name); Trap Mgr Options; Trap Manager Dlci (Trap Dlci); Trap Manager Ip Address (Trap Ip) - ADTRAN DSU IQ User Manual

Write Community Name (WR COM NAME)

Enter the authentication strings used for SNMP management.
Match the DSU IQ to the SNMP manager for write privileges. If
using front panel entry, see Using the Front Panel on page 9-6 for
more information.

Trap Mgr Options

The T
SNMP managers.

Trap Manager DLCI (TRAP DLCI)

If the trap manager port is set for N
identifies the virtual circuit used for all traps generated by the DSU
IQ.

Trap Manager IP Address (TRAP IP)

Enter the IP address of the SNMP manager to which the DSU IQ
sends traps.

Trap Manager Port (TRAP PORT)

Enter the DSU IQ port used to transmit traps to the SNMP
manager. Choices are N
P
ethernet card is installed.

Next (NEXT key on front panel)

Edit the next entry in the Trap Manager Options table.

Previous (PREV key on front panel)

Edit the previous entry in the Trap Manager Options table.

Add (ADD key on front panel)

Add a new entry to the Trap Manager Options table.
61200212L1-1
M O
RAP ANAGER
, and E
ORT THERNET
DSU IQ User Manual
Chapter 9. System Configuration
table defines routes for up to five
PTIONS
ETWORK
, DTE P , N
ONE ORT
P . E P
ORT THERNET ORT
or DTE, this parameter
, C
P
ETWORK ORT ONTROL
is available only if the
9-3