V-Archive Software On A Pc - Vidicode V-Tap ISDN PRI Manual

2.2.2
The V-Archive software
data from the V-Tap ISDN, convert this data into audio files and store
the files into its own database. The V-Archive software can also receive
multiple data streams from different V-Tap units simultaneously.
To setup the V-Archive software to accept connections from a V-Tap, go
to Options, Setup, Recording tab and enable as is shown below:
NOTE1: The PC's IP address is the "Tunnel Server Address" in the V-Tap.
NOTE2: Be sure that the PC's firewall is open for TCP port 2016, the
default "Tunnel Destination Port" in the V-Tap. During
installation, V-Archive tries to open port 2016 in Windows.
NOTE3: Be sure the Encryption password is the same as the
"Encryption Password" in the V-Tap.
NOTE4: The V-Archive software itself does not need licenses to receive
from the V-Tap. Licenses are inside the V-Tap.
The V-Archive software for the PC is further not described in this
manual; see for more details the
V-Tap ISDN PRI Manual EN v1.23 Nov 2021

V-Archive software on a PC

for the PC can, just as the Apresa, receive Tunnel
V-Archive manual.
© 2018-2021 Vidicode 9