Number-List (Black- Or White-List) - Vidicode V-Tap ISDN PRI Manual

8 Number-list (Black- or White-list)

The V-Tap ISDN can record the calls depending on the telephone
number. Besides the web setting
file containing a list of numbers may exist inside the V-Tap:
BLACK.TXT
WHITE.TXT
Only one of these two files can be active at the same time. When both
exist, then BLACK.TXT is taken. Numbers from the web setting are
added to this list (for both in total maximal 100 numbers).
When using a black-list:
If the number is found in the black-list, the call is not recorded. All other
numbers/calls are recorded.
When using a white-list:
If the number is found in the white-list, the call is recorded. All other
numbers/calls are not recorded.
Putting the number-list onto the system:
1. With an SD card:
Put the file BLACK.TXT or WHITE.TXT in the root of an SD card.
Insert the SD card into the V-Tap. The system will automatically copy
the file to its internal memory and delete the file from the card.
Then the system reboots and the new list is active.
2. With FTP:
Connect to the V-Tap with FTP and upload BLACK.TXT or WHITE.TXT.
Rules for the number-list:
• The black- or white-list can hold maximal 100 numbers.
• All numbers must be put on a separate line.
• Empty lines are not allowed in the list. They mark the end of the list.
• The numbers in the list must have the same format as on the ISDN
line, but without preceding zero's (0793471001 becomes 793471001).
• It is also possible to enter the last (right-most) digits only of each
number. But then, all entries must have the same length!
• The wildcard character "*" can be used to denote a range (79347*).
V-Tap ISDN PRI Manual EN v1.23 Nov 2021
: A black-list is used.
: A white-list is used.
Black/White-list
© 2018-2021 Vidicode
Numbers, also a text
43