Vidicode V-Tap Analog Quick Manual

Hide thumbs Also See for V-Tap Analog:

Quick Guide for the V-Tap Analog

The V-Tap Analog is a device that can record the audio from an analog

telephone line or any telephone that works with a handset. The captured data is

stored onto an SD card and can optionally be sent to an external server (an

Apresa recorder or the V-Archive software running on a PC).

NOTE1: The USB power supply needs to deliver 500 mA current, else the system does not start.

NOTE2: When no analog line is connected or when no SD card is inserted, the Red LED starts

flashing on first power on, to indicate an error situation.

NOTE3: The SD card must be formatted with the FAT32 file system. Cards above 32 GB (up to 2 TB)

are not tested and must be formatted as FAT32 first, before inserting them into the V-Tap.

• V-Tap Analog unit

• USB adapter

• USB cable

• Telephone cable

• SD card

• CD with manual and V-Archive software for the PC

• 1 year Support & Update license

• This Quick Guide

v1.14

BOX CONTENT

1/4

Table of Contents

Do you have a question about the V-Tap Analog and is the answer not in the manual?

Page 1 Quick Guide for the V-Tap Analog The V-Tap Analog is a device that can record the audio from an analog telephone line or any telephone that works with a handset. The captured data is stored onto an SD card and can optionally be sent to an external server (an Apresa recorder or the V-Archive software running on a PC).
Page 2 Quick Guide for the V-Tap Analog HARDWARE INSTALLATION – 2 WAY’S TO CONNECT 1. On an analog line, in between the wall and the phone: 2. In between the handset and the phone: NOTE1: USB must be connected for power supply and must deliver 500 mA.
Page 3 Windows Vista/7/8/10 , Intel Pentium >2GHz , 4GByte RAM , >100 MB free disk space. V-ARCHIVE SOFTWARE INSTALLATION 1. Connect the V-Tap Analog to a free USB port on your PC. NOTE: The V-Tap unit must be connected to the same PC, otherwise the installer will not continue.
Page 4 Quick Guide for the V-Tap Analog CHECKLIST FOR TUNNEL CONNECTION A connection between the V-Tap and the V-Archive PC software (or Apresa recorder) is needed to get the recorded data automatically into a user accessible database. The following checklist can be used to setup this Tunnel connection: 1) Install the Hardware (see page 2).