Lumina 750
6.12
Function key 11: Time/time clock/registr.
11
à
Time
Date
11
à
Start
Time
Start-1
RunT-1
RepT-1
Time
Readout of the current time. This time will remain running, even during a power
failure. Alter the time only when changing from summer to winter time and vice
versa.
Readout of the current date.
Time clock_1
The Lumina 750 has three time clocks. Three start, run and repeat times can be
entered per time clock.
Readout of the next time the Lumina 750 will activate the clock. If the clock is active,
the time at which it was activated will be shown.
Readout of the current time. This time will remain running, even during a power
failure. Alter the time only when changing from summer to winter time and vice
versa.
Setting of the time (minutes and hours) at which the Lumina 750 must activate the
clock for the first time.
Setting of the length of time (minutes and hours) the clock must remain on.
Setting of the repeat time (minutes and seconds) which must elapse before the
Lumina 750 will re-activate the clock for the same length of time as at Start-1.
Classic screens
48
Need help?
Do you have a question about the 750 and is the answer not in the manual?
Questions and answers