Lumina 750
6.5
Function key 4: O2/CO2/NH3
4
Ctrl. value O2
O2-1
O2-2
CO2
NH3
6.6
Function key 5: RH
5
RH Air inlet
Ctrl. value RH
RH
/
DB
WB
Setting of the desired O
-content (%).
2
Readout of the current O
-content measured on measuring point 1 (%).
2
Readout of the current O
-content measured on measuring point 2 (%).
2
Readout of the measured CO
Readout of the measured NH
Setting of the required relative humidity of the air inlet (%).
Readout of the calculated relative humidity of the air inlet (%).
Readout of the measured relative humidity (RH) using two temperature sensors: a
dry bulb and a wet bulb. One of these sensors (the wet bulb) is kept wet by a wick
hanging in a water reservoir. The control computer calculates relative humidity (RH)
using measurements from these two sensors.
-content (%).
2
-content (ppm).
3
Classic screens
40
Need help?
Do you have a question about the 750 and is the answer not in the manual?
Questions and answers