Fancom 750 User Manual page 23

Lumina 750
3.1.8 O2 control
Classic O
à Dial
Readout of the average compost temperature (°C /°F). Faulty sensors and sensors
showing a too great deviation are not used for this calculation.
● The control computer will automatically set sensors showing a temperature
that differs too much from the previous average temperature (more than the
maximum deviation) to non-active. These sensors will have to be re-activated
manually if they are to be included in the calculation of the
temperature.
● The computer will reactivate all non-active sensors after the
(phase 0).
If there are only two sensors remaining to calculate the
temperature, the computer will only de-activate them if they are faulty.
Readout of the current compost temperature control value (°C /°F). At the beginning
of each growing phase the control value is automatically set to the
compost temperature. The control computer will gradually regulate the compost
temperature towards the
Readout of the lowest measured compost temperature (°C /°F) from sensors that
are included in the calculation of the
Readout of the highest measured compost temperature (°C /°F) from sensors that
are included in the calculation of the
Setting of the end temperature of the compost (°C /°F). The control computer will
gradually regulate the
Setting of the adjustment speed of the
or °F/hour).
control settings: Function key 4: O2/CO2/NH3 (page 40).
2
Compost temperature end
Average compost
Average compost
Compost temperature control value
Compost temperature control value
Using the Lumina 750
Average compost
EMPTY phase
Average compost
Average
value.
temperature.
temperature.
towards the end value.
(°C/hour
20