Fancom 750 User Manual page 39

Lumina 750
Air inlet temp. Readout of the measured air inlet temperature (°C/°F).
O2 Readout of the measured O
Phase Setting of the current tunnel phase. The phases can be started manually here.
Fresh air
Readout of the amount of fresh air (m
in the selected growing room depending on the system settings of the control
computer.
Fan
Readout of the total air flow (m
growing room depending on the system setting of the control computer.
Pressure Readout of the measured pressure.
Sub-phase Setting of the current sub-phase. Sub-phases can be manually started here (NONE,
CLEANING, DISINFECTION,
Heating Readout of the heating valve position (%). If this position cannot be measured,
value -99 will be displayed.
Cooling Readout of the cooling valve position (%). If this position cannot be measured, value
-99 will be displayed.
Cooling-2 Readout of the 2nd cooling valve position (%). If this position cannot be measured,
value -99 will be displayed.
Steam Readout of the steam valve position (%). If this position cannot be measured, value
-99 will be displayed.
Humidify Readout of the humidity valve position (%). If this position cannot be measured,
value -99 will be displayed.
Thermal Read out of the thermal valve position (%). If this position cannot be measured,
value -99 will be displayed.
Exhaustvalve Readout of the exhaustvalve position (%). If this position cannot be measured,
value -99 will be displayed.
Fillweight Setting of the current amount of compost in tunnel (weight in tonnage).
Before starting a phase, enter the phase settings using keys
which will be saved in the computer's memory.As soon as a phase is activated, the computer will copy the original
settings of the phase concerned to the current phase settings. While the phase is active, the current settings can
2
be changed at keys thru
content (%) in the selected tunnel.
2
FILLING
10
.
3
/hour) or the air inlet position (%) values
3
/hour) or the fan position (%) values in the selected
or O2 CALIBRATION).
13 19
thru . These are the original phase settings,
Classic screens
36