Fancom 750 User Manual page 25

Lumina 750
à Dial
Readout of the measured position of the fresh air inlet (%) or the fresh air flow (m
hour).
Readout of the value currently used by the control computer to regulate the fresh
air. This can be the position of the fresh air inlet (%) or the air flow (m
control value is always a value between the
air
CO
of the
Setting of the minimum fresh air (% or m
never drop below this value, except if there is the risk of frost.
Setting of the maximum fresh air (% or m
never rise above this value.
values. If the fresh air control is used, the computer will take the air temperature,
and relative humidity influences on the fresh air into account in the calculation
2
Fresh air control value .
Exception: The Fresh air control value
fresh air value when frost prevention uses an active mixed air sensor.
The Maximum fresh air
remain completely open with a
while there is an extra increase of fan speed.
Minimum fresh air
may drop below the
3
/hour). The Fresh air control value
3
/hour). The Fresh air control value
can be set up to 120%. The fresh air inlet will
Fresh air control value
Using the Lumina 750
3
/
3
/hour). The
and Maximum fresh
Minimum
may
may
higher than 100%
22