Alarm; Alarm Overview - Fancom 750 User Manual

Lumina 750
4.

Alarm

The Lumina 750 displays the alarm overview by pressing
1. Loud alarm: An active loud alarm sounds a siren, shows an alarm message and a report on the screen. This
type of alarm has a high priority.
2. Silent alarm: An active silent alarm shows an alarm message and a report on the screen. This type of alarm
has a low priority.
4.1

Alarm overview

Status
Message
Readout / setting the alarm status:
● Alarm: the type of alarm is presented on the display.
● Alarm stand by: no alarm is presented. The alarm is stand by.
● Alarm test: the alarm is tested. After the test the alarm will be reset and the
alarm status changes to Alarm stand
● Alarm cancelled: an alarm is cancelled. The control computer switches off the
alarm, but the alarm status remains visible.
● Silent alarm: an alarm message is presented on the display only.
● Alarm temporary. off: switch off the current alarm. When the alarm is been
cancelled the status will automatically change to
the status is reverted to Alarm stand
● Alarm disabled: switch off the alarm entirely. Perform this activity only if a room
(growing room / tunnel / bunker) is unoccupied. Do not forget to reset the alarm
status to
Alarm stand by.
● -: alarm function is not in use.
Readout of the alarms (see table below).
. There are two types of alarm:
by.
Alarm stand
by.
Alarm
by. Always check if
29