Communication - Samson 5857 Mounting And Operating Instructions

3.1.1

Communication

Serial interface
The actuator with positioner is fitted with an
RS-232 serial interface. This allows commu-
nication with TROVIS-VIEW using SSP proto-
col (see Fig. 3-2).
Serial interface
Fig. 3-2: Serial interface
EB 5857 EN
Design and principle of operation
Configuration
The actuator with positioner is configured
with the TROVIS-VIEW software. In this case,
the serial interface on the actuator is used to
connect the actuator to the computer. The
TROVIS-VIEW software enables the user to
easily configure the positioner as well as
view process parameters online.
Note
TROVIS-VIEW can be downloaded free of
charge from our website at
u www.samsongroup.com > Service &
Support > Downloads > TROVIS-VIEW.
Further information on TROVIS-VIEW (e.g.
system requirements) is available on our
website and in the Data Sheet u T 6661 as
well as the Operating Instructions
u EB 6661.
Î See the 'Start-up and configuration' sec-
tion.
3-3