Start-up and configuration
Red and yellow LEDs
Fig. 7-1: Location of the initialization key and LEDs
Blinking pattern of the red LED
− Initialization
7.3 Configuring the actuator with positioner
The actuator is configured with the TROVIS-VIEW software (see Annex A). In this case, the
serial interface on the actuator is used to connect the actuator to the computer (see the 'De-
sign and principle of operation' section).
Î Refer to u EB 6661 for more details on configuration and operation using TROVIS-VIEW.
7-2
Initialization key
On
Off
Time in s
EB 5857 EN