Presets - Cobalt Digital Inc 9910DA Series Product Manual

Operating Instructions
Table 3-1 9910-DA-4Q-3G Function Menu List — continued

Presets

The Presets tab offers five presets (Preset 1 thru Preset 5) where unique user custom settings can be saved. Any custom user
control settings state can be saved to a preset, including:
• All Output Source (crosspoint) tab settings (including Failover routing and actions settings).
• All Network Settings tab settings.
• All Reclock Output tab settings.
• All Alarm tab settings.
Note: • Before saving custom states to a preset, make certain Card state indicator on Card Info pane shows green — OK. If
Save is pressed before OK (green), intended changes may not be saved to the preset.
• Pressing Restore Factory Defaults will restore all basic factory routing (including disabling any failover settings).
• Even if Restore Factory Defaults is invoked, any saved preset can be recalled and invoked using the Load Preset
function described above.
9910DA-3G-OM (V1.7)
9910DA Function Menu List and Descriptions
Allows user control settings to be saved in a Preset and
then loaded (recalled) with a one-button press as
desired. Presets also provides a one-button restore of
factory default settings.
To restore factory defaults from any custom settings or engaged preset,
press Restore Factory Defaults. (Saved presets can be invoked again
if desired by selecting and loading the preset as shown below.)
To save custom settings, press Save Preset of the desired preset
number to which the states are to be saved. When Save Preset is
pressed, a Confirm pop-up appears.
To load an already-saved preset, press Load Preset of the desired
preset number to be loaded. When Load Preset is pressed, a Confirm
pop-up appears.
9910DA PRODUCT MANUAL
3-5