Cobalt Digital Inc 9910DA Series Product Manual page 2

3g/hd/sd/asi multi-rate da with x4 output crosspoint
Table of Contents

Advertisement

Copyright
©Copyright 2021, Cobalt Digital Inc. All Rights Reserved.
Duplication or distribution of this manual and any information contained within is strictly prohibited without the express written
permission of Cobalt Digital Inc. This manual and any information contained within, may not be reproduced, distributed, or
transmitted in any form, or by any means, for any purpose, without the express written permission of Cobalt Digital Inc.
Reproduction or reverse engineering of software used in this device is prohibited.
Disclaimer
The information in this document has been carefully examined and is believed to be entirely reliable. However, no responsibility
is assumed for inaccuracies. Furthermore, Cobalt Digital Inc. reserves the right to make changes to any products herein to improve
readability, function, or design. Cobalt Digital Inc. does not assume any liability arising out of the application or use of any
product or circuit described herein.
Trademark Information
®
Cobalt
is a registered trademark of Cobalt Digital Inc.
®
Compass
is a registered trademark of Cobalt Digital Inc.
®
openGear
is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross Video Limited.
Congratulations on choosing the Cobalt
(This manual covers the 9910DA DA Quad-Channel (4Q), Dual-Channel (2Q), and Single-Channel (1Q)
models, each available as Reclocking (-RCK) and Non-Reclocking). The 9910DA cards are part of a full line
of modular processing and conversion gear for broadcast TV environments. The Cobalt Digital Inc. line
includes video decoders and encoders, audio embedders and de-embedders, distribution amplifiers, format
converters, remote control systems and much more. Should you have questions pertaining to the installation or
operation of your card, please contact us at the contact information on the front cover.
Manual No.:
Document Version:
Release Date:
Applicable for
Firmware Version
(or greater):
Description of
product/manual
changes:
®
9910DA 3G/HD/SD/ASI Multi-Rate DA with x4 Output Crosspoint.
9910DA-3G-OM
V1.7
June 14, 2021
2.1.1
- Clarify card-edge local control modes for all model
variants including -1Q and -2Q model variants.
- Edit manual to show enhanced rear module
labeling views.
9910DA-3G-OM (V1.7)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9910DA Series and is the answer not in the manual?

Table of Contents