Table of Contents
Advertisement
troubleshooting
Symptom
Dimmer/switch keeps
turning on and off.
Dimmer/switch performs
nor mal ly when op er at ed
manually, but fails to respond
to master control button
pushes.
Need help? Contact Lutron Technical Support 24/7: 800.523.9466
Possible Cause
Unit has been wired
incorrectly.
Wattage is under
recommended minimum load.
2 or more AuroRa
dimmers/
®
switches on one circuit.
The dimmer/switch may be
out of communication range
of the central antenna.
The master control may be
out of communication range
of the central antenna.
Remedy
Refer to wiring instructions.
See number 2 under either
Dimmers or Switches on
page 21.
Remove and replace
additional AuroRa dimmer
with standard single pole
or 3-way switch.
Move the central antenna
closer to the dimmer/switch.
Move central antenna closer
to master control.
Lutron
|
25
Advertisement
Table of Contents
Need help?
Do you have a question about the AuroRa AR-ENT-2S3D Series and is the answer not in the manual?