Frequently Asked Questions - Lutron Electronics AuroRa AR-ENT-2S3D Series Package Installation Manual

frequently asked questions

How far away can I use
my wireless controller?
What is the range of the
central antenna?
Will other equipment in
my home or neighboring
homes interfere with my
AuroRa system?
®
What happens to the
AuroRa system during a
power outage?
Can I replace or move a
dimmer/switch after the
initial installation?
Can I add to my AuroRa
system?
Can I use two AuroRa
dimmers/switches to
control a light or a group
of lights?
|
Lutron 20 Need help? Contact Lutron Technical Support 24/7: 800.523.9466
RF Communication
System Visor
Advanced
Bridge Add
Power
The central antenna has a radio frequency range of at least 30 ft. in
any direction.
AuroRa operates at a frequency different from most remote controls,
cellular/portable phones, and other wireless devices. The
communication protocol ensures that any device operating at the
same frequency will not affect your system.
AuroRa has non-volatile memory that maintains all system
addressing and master control programming during a power
outage. After the power outage, the memory restores all system
lighting to its previous state before the power failure.
Yes. One or all of the dimmers/switches can be relocated to different
locations in the home, if the user prefers to control different lights. All
system addressing, as well as master control and wireless controller
programming remains unchanged.
You can increase the capability of your AuroRa system by adding
another complete package or by adding up to nine additional
(ten total) wireless controllers (See "Bridging AuroRa Systems" on
page 18 and "Activating additional Wireless Controllers" on page 19).
No. AuroRa dimmers/switches work with standard 3 or 4-way
switches. Only one AuroRa dimmer can be used to control a light or
group of lights.
All On All Off Favorite
Wireless Controller*
* 100 ft. typical range in
any direction from the
central antenna