Security Setup - FIC PA-2011 Manual

PA-2011 Mainboard Manual

Security Setup

Set Supervisor and User Passwords
AMI BIOS Password Support AMI BIOS Setup has a password feature. The
system can be configured so that all users must enter a password every time
the system boots or when AMI BIOS Setup is executed. You can set either a
Supervisor password or a User password. If you do not use a password, Just
press Enter when the password prompt appears. The password check option
is enabled in Advanced Setup by choosing either Always (the password
prompt appears every time the system is powered on) or Setup (the password
prompt appears only when AMI BIOS is run). The password is stored in
CMOS RAM.
You can enter a password by typing the password on the keyboard. When
you select Supervisor or User, AMI BIOS prompts for a password. You must
set the Supervisor password before you can set the User password. Enter a 1
to 6 character password. The password does not appear on the screen when
typed. Make sure you write it down. If you forget it, please read Clear
Password Section on the next page.
58