Table of Contents
Advertisement
Advanced Chipset Setup
USB Function
This option allows you to enable the Universal Serial Bus (USB) feature. The
settings are Disabled or Enabled. The default setting is Disabled.
USB Legacy Support
This feature enables your system to use your USB peripheral devices.
The options are Disabled or Enabled. The default setting is Disabled.
Memory Hole
When enabled, the memory hole at the 15MB address will be reseved for
512-640KB, 15-16MB, or 14-16MB address range of the ISA add-on cards
that request this memory area.
The options are None, 15M-16M (1M), or 14-16MB (2M). The default
setting is None.
Linear Burst
When enabled, allows you to configure the CPU to SRAM data read/wirte
mode. If you use a Cyrix CPU, select Enabled; if you use an Intel CPU or
AMD-K5 CPU, please stay with the default value, Disabled. Please refer to
Page 17, SRAM.
AMI BIOS Setup
47
Advertisement
Table of Contents
