FIC PA-2011 Manual page 54

PA-2011 Mainboard Manual
Boot To OS/2
It allows you to enable the system BIOS to run with the IBM OS/2.
The settings are Yes or No. The default setting is No.
External Cache
This feature allows you to disable the external cache function.
The settings are Disabled or Enabled. The default setting is Enabled.
System BIOS Cacheable
Enable it to allows the contents of the F0000h memory segment to be read
from or written to the L2 cache memory. The contents of the F0000h
memory segment are always copied from the BIOS ROM to system RAM for
faster execution.
The settings are Disabled or Enabled. The default setting is Enabled.
VGA BIOS Cacheable
When enabled, allows the system to use the video BIOS codes from SRAMs,
instead of the slower DRAMs or ROMs. The settings are Disabled or
Enabled. The default setting is Enabled.
C000,16K Shadow; C400,16K Shadow;
C800,16K Shadow; CC00,16K Shadow;
D000,16K Shadow; D400,16K Shadow;
D800,16K Shadow; DC00,16K Shadow
These options control the location of the contents of the ROM beginning at
the specified memory location. If no adapter ROM is using the named ROM
area, this area is made available to the local bus.
[Disabled] The video ROM is not copied to RAM. The contents of the video
ROM cannot be read from or written to cache
memory.
[Enabled] The contents of C0000h - DC00h are written to the same address
in system memory (RAM) for faster execution. The settings are Disabled,
Enabled, Cached. The default setting of "C000, 16K Shadow; C400, 16K
Shadow" is Enabled; the others are Disabled.
46