PA-2011 Mainboard Manual
Peripheral Setup
Onboard FDC
This option enables the floppy drive controller on the mainboard.
The settings are Auto, Enabled, or Disabled. The default setting is Auto.
Onboard Serial Port1
This option enables serial port 1 on the mainboard and specifies the base I/O
port address for serial port 1.
The settings are 3F8h (Default) , 2F8h, 3E8h, 2E8h, Disabled.
Onboard Serial Port2
This option enables serial port 2 on the mainboard and specifies the base I/O
port address for serial port 2.
The settings are 3F8h, 2F8h (Default), 3E8h, 2E8h, Disabled.
Serial Port2 Mode
This option enables serial port 2 on the mainboard and specifies the base I/O
port address for serial port 2. The settings are Standard, IrDA, ASK IR. The
default setting is Standard.
56