DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Alarm Clock
On the VoIP / Alarm Clock page, you can configure the phone connected to the FXS port of the
router as an alarm clock.
Move the Enable alarm clock switch to the right. Then specify the time at which the phone
should ring in the Hour and Minutes fields. In the Ring time field, specify the signal duration.
Then click the APPLY button.
When the router is powered off or rebooted, the system time is reset to the default value.
!
If you have set automatic synchronization for the system time, the internal clock of the
device will be configured after connecting to the Inter net. If you have set the system time
manually, you need to set the time and date again.
Figure 147. The VoIP / Alarm Clock page.
Page 186 of 221
Configuring via Web-based Interface