FujiFilm 700 Series Operation Manual page 142

Appendix
<Portable and Mobile RF Communications Equipment Compliance Information and
Guidance>
Table 7
Guidance and Manufacturer Declaration - Electromagnetic Immunity -
This device is intended for use in the following prescribed electromagnetic environments. Customers and
users of this product are advised to check that it is being used in such environments.
Immunity test
Conducted RF 3 Vrms
IEC/EN 61000-4-6 150 kHz to 80 MHz
Radiated RF 3 V/m
IEC/EN 61000-4-3 80 MHz to 2.5 GHz
Note
 At 80 MHz and 800 MHz, the higher frequency range applies.
 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
Appendix-16
IEC 60601
Compliance level
Test level
3 Vrms
3 V/m
Guidance
Portable and mobile RF
communications equipment should
be used no closer to any part of
this product, including cables, than
the recommended separation
distance calculated from the
equation applicable to the
frequency of the transmitter.
Recommended separation
distance
d = 1.2
√ P
d = 1.2 80 MHz to 800 MHz
√ P
d = 2.3 800 MHz to 2.5 GHz
√ P
Where "P" is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and "d" is
the recommended separation
distance in metres (m). The electric
field intensity from a fixed RF
transmitter determined by an
electromagnetic field study
be lower than the compliance level
b
in each frequency range .
Interference may occur near
devices that display the following
symbol.
a
should
897N201625