Fan Cage Replacement - Lenovo ThinkSystem SR950 Setup Manual

• YouTube
•
Youku
Figure 82. System board filler installation
Step 1. Align the system board filler with the rails in the compute tray; then, insert the system board filler,
making sure that the rails on the board fit into the slots in the compute tray.
Step 2. Slide the system board filler into the compute tray until the release clips snap into the locked
position.
After you install the system board filler, install the compute tray and front cover. See "Install a compute tray"
on page 307 and "Install the front cover" on page 322.

Fan cage replacement

Fan cages are in the upper and lower compute trays or optional storage tray that are accessed from the front
of the server. Procedures for removing and installing fan cages in the upper and lower trays are different.
Remove a fan cage (upper tray)
The upper fan cage is in the upper compute tray or optional storage tray that is accessed from the front of
the server. After removing the upper tray, turn it upside down, press the fan cage releases, and pull the fan
cage toward the front of the tray to remove it; then, disconnect the fan cage electrical connector.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
ThinkSystem SR950 Setup Guide
314