Front Cover Replacement - Lenovo ThinkSystem SR950 Setup Manual

Front cover replacement

Use the following procedures to remove and install the front cover.
Remove the front cover
Remove the front cover by pressing the release buttons and pulling the cover from the front of the server.
Complete the following steps to remove the front cover:
Watch the procedure. A video of the replacement process is available:
•
YouTube
•
Youku
Figure 87. Front cover removal
Step 1. Press release buttons at either side of the front cover.
Step 2. Pull the cover forward and remove it from the server.
After you remove the front cover:
• If you are instructed to return the front cover, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
• If you are planning to recycle the front cover, follow the instructions in "Disassemble the front cover for
recycle" in Maintenance Manual for compliance with local regulations.
Install the front cover
Install the front cover by sliding the cover into position and pressing until it is fully seated.
Complete the following steps to install the front cover:
Watch the procedure. A video of the replacement process is available:
•
YouTube
•
Youku
ThinkSystem SR950 Setup Guide
322