b.
Disconnect the USB-C board cable from the board.
Step
Screw (quantity)
2
M2 × L2.5 mm, flat-head, nylon-coated (1)
Step 2.
Install the USB-C board and cable in reverse order.
Thermal fan assembly
Follow the instructions to replace thermal fan assembly.
For access, remove this FRU:
• "LCD module" on page 56
Step 1.
Remove the assembly as shown below.
a.
Disconnect the thermal fan assembly from the system board.
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
71