Rear View Leds - Lenovo ThinkSystem SR950 Setup Manual

Press this button to force a nonmaskable interrupt to the processor. You might have to use a pen or the end
of a straightened paper clip to press the button. You can also use it to force a blue-screen memory dump.
Use this button only when you are directed to do so by Lenovo Support.
23 XClarity Controller network connector (RJ45)
Used to attach an Ethernet cable to manage the system using XClarity Controller.
24 Serial connector
Connect a 9-pin serial device to this connector. The serial port is shared with the XCC. The XCC can take
control of the shared serial port to redirect serial traffic, using Serial over LAN (SOL).
25 USB 3.0 connectors (2)
Used to attach a device that requires a USB 2.0 or USB 3.0 connection, such as a keyboard, a mouse, or a
USB flash drive.
26 VGA video port
Used to attach a VGA-compatible video device, such as a VGA monitor.
27 Service only connector
This connector is reserved for service only.

Rear view LEDs

The illustration in this section shows the LEDs on the rear the server.
Figure 8. Rear LEDs
.
Chapter 2 Server components
33