Lenovo ThinkSystem SR950 Setup Manual page 311

• Be prepared to support the full weight of the compute tray when you remove it from the chassis.
• Do not use the release levers as handles to support the compute tray.
Figure 77. Compute tray removal from chassis
After you remove the compute tray:
• If you are instructed to return the compute tray, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
Install a compute tray
Install a compute tray by inserting it in the front of the chassis, pushing it in until it stops, and closing the
release levers.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
"
CAUTION:
" on page 56 " " on page 254
Appendix B. Component reference
307