10.5 DEVICE
This includes SD Card, Logs and Audio. The respective interfaces and functions are described below.
10.5.1
HDD (WHERE INCLUDED)
Select HDD in the Device menu to access the following page:
Insert the SD card in the device: the system will automatically detect the total capacity and provide information on the
remaining recording time.
Overwrite: when the SD card capacity is full, new recordings overwrite the previous ones (this function is enabled by
default).
Format: Formats the SD card.
10.5.2
AUDIO
Select Audio in the Device menu to open the following page:
Audio setup procedure:
Select the Enable Audio option to access the audio parameters, then set the audio input/output volume (0~10) and select
Save to save the set parameters. (Note: the audio option in Streaming Video must be enabled in order to use the audio
function).
DS1099-014A
30