Table of Contents
Advertisement
Eight different angles can be selected on the circular control,
PTZ Speed: 0 – 10 indicates different PTZ speeds,
•
ZOOM zooms in and out
•
FOCUS increases or decreases FOCUS
•
Restore: resets default settings
•
On Auto Focus cameras with DF optics, the PTZ interface will be as follows:
DS1099-014A
Option
Value
Zoom
Step/-/+
Step/-/+
Focus
SEMI ÷ AUTO ÷
AF MODE
MANUAL ÷ OFF
ONE SHOT AF
/
TDN AF
ON ÷ OFF
/
LENS INIT
SAVE POSI ÷ OFF
POWER MODE
÷ WIDE
AutoFocus
/
Restore
/
/
Refresh
15
Explanation
Manually adjusts zoom (+ zoom in / - zoom out)
Step: defines zooming speed
Manually adjusts focus (+ increase / - decrease)
Step: defines focusing speed
This function is used to customise the camera focusing
mode. Possible options are:
SEMI: focusing is performed only after the zooming
operations are finished.
AUTO: focusing is adjusted automatically.
MANUAL: focusing is adjusted manually.
OFF: focusing and zoom are deactivated. Activate this
option after having adjusted focus and zoom as required.
Function not available.
This function, when activate, allows automatic focus
adjustment at each day->night or night->day switch.
This re-initialises the optics and obtained optical
calibration. To be performed when the camera is installed
for the first time and in case of movements with
consequent change of the framed picture.
IMPORTANT: do not use with AF MODE equal to OFF.
This is used to adjust the zoom whenever the camera is
switched back on.
SAVE POSI: this holds the zoom position set before the
camera was switched off.
OFF: do not save the settings stored before switch-off.
WIDE: the camera is switched on in Wide mode.
Adjusts focus automatically
Resets PTZ interface default settings (including focus)
Updates the PTZ interface with changes to parameters
(including focus)
Advertisement
Table of Contents
