Cleaning The Device - urmet domus 1096/401 User Manual

This menu permits to select resolutions and video formats of the images
HD
VIDEO STANDARD
REBOOT&APPLY
RETURN
HD (High Definitions)
The camera can use four different video outputs, on the same BNC connector:
•
High definition video output AHD (Analog High Definition)
•
CVBS standard interlaced video output
•
Video output in TVI or CVI mode, only for 1080P resolutions. The correct working of these
standards depends upon the compatibility of the conncted devices, that can be guaranteed only
for the devices of Urmet catalogue.
VIDEO STANDARD
The available resolutions are:
•
5MPX at 20 frames
•
5MPX at 12,5 frames
•
4MPX at 25 frames
•
4MPX at 30 frames
•
1080 P (2MPX) at 25 frames
•
1080 P (2MPX) at 30 frames
Only for CVBS: PAL or NTSC
REBOOT&APPLY
Once the desired resolution has been selected, it is necessary to launch the REBOOT&APPLY command.

CLEANING THE DEVICE

•
Rub delicately with a dry cloth to remove dust and dirt.
•
Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.
•
Do not use volatile liquids (such as petrol, alcohol, solvents, etc.) or chemically treated clothes to
clean the device to prevent deformation, deterioration or scratches to the paint finish.
16
VIDEO OUTPUT
VIDEO OUTPUT
AHD
4MP 25
DS1096-015A