10.1.1
PRIVACY ZONE
Select Privacy Zone in Display Configuration to open the following page:
Enable Privacy Zone, and then use the right mouse button to trace rectangles around areas not to be displayed during recording,
in screenshots and in Live viewing.
Save when done to keep the settings.
10.1.2
ROI
Select Display to open the following page:
ROI setting procedure:
1.
Choose a region of application.
2.
Press and hold the left mouse button and drag out a ROI (only one ROI can be set for each zone),
3.
Select Save to apply the ROI.
Region ID: Up to 8 ROI zones can be set in one bit stream.
Enable Region: Enable or disable the ROI.
ROI level: Select a bit stream for the ROI from worst (), worse (), bad (), normal (), better () and best ().
DS1099-014A
20