Table of Contents
Advertisement
Type: Network connection mode: DHCP (Automatically Acquired), Static (Manually configured) and PPPOE; DHCP
(Automatically Acquired) is the default setting.
Client Port: The port for the clients that connect to the IP camera.
HTTP Port: Web port for the IP camera.
IP address: The IP address of the IP camera.
Subnet mast: The subnet mast of the IP camera.
Gateway: The default gateway of the device.
DNS 1: Sets the primary DNS server.
DNS 2: Sets the secondary DNS server.
UPNP: Enables or disables the UPNP function for the device (enabled by default).
Note: To enable the UPNP function, the client port must be set to a value between 1024 and 65535; the client port is used
to connect with a mobile phone or other device.
DS1099-014A
22
Advertisement
Table of Contents
