Device Connection; Connectors Layout For Ip Camera (Where Provided) - urmet domus I Series User Manual

4

DEVICE CONNECTION

IP camera can be connected in two ways:
Connection to PC
Connect IP camera to PC via straight-through network cable, with power input connected to a DC 12V adaptor, and set
the IP addresses of the PC and IP camera in one network segment. The IP camera will communicate with PC within one
minute after being powered on if the network operates normally.
1. Connection to router/switch
This is more commonly used in connecting the IP camera to Internet, where the camera and PC are connected to
LAN ports of a router/switch, with gateway of the camera set to the IP address of the router.
4.1

CONNECTORS LAYOUT FOR IP CAMERA (WHERE PROVIDED)

1. BNC Interface: Local video signal output.
2. Audio Output Interface: RCA female head (white), can connect with external devices, such as speaker.
3. Audio Input Interface: RCA female head (red), can connect with input devices, such as microphone.
4. RJ45 Interface (Network Interface): Network signal output.
5. Power Interface: DC 12V.
6. Reset Button: Device will reset to defaults after pushing the button 3 seconds.
Alarm Interface: Include alarm input and output interface. ③,④ are alarms input, ① is alarm output, ② is used as
7.
GND.
DS1093-568C
All manuals and user guides at all-guidesbox.com
11