Non-ROI frame rate Fps: Set the frame rate outside of the ROI; the smaller the value, the higher the image quality in the
ROI. The frame rate range depends on the video standard and the resolution. It varies from 1 to 25 Fps. (Note: Different
non-ROI frame rates may be given to different ROIs, but the lowest value among them will be used as the frame rate
applied to the non-ROI area on the preview frame.
10.2 RECORD PARAMETERS
10.2.1
REC PARAMETERS
Select Rec Parameters in the Record menu to go to page shown below.
This function allows you to control recording, pre-recording and type of recording (main stream and substream).
10.2.2
SCHEDULE
Select Schedule in the Record menu to access the following page:
Example: a grid on the table represents 30 minutes; green indicates normal recording, yellow a movement detection alarm
and red a recording alarm. You can set these parameters, according to your needs, to choose different types or times of
recording.
10.3 NETWORK
10.3.1
NETWORK
Select Network to open the following page:
DS1099-014A
21