SRAM ROCKSHOX RUDY XPLR Service Manual page 21

10 Remove the air piston outer o-ring. Remove the air piston outer o-ring.
Clean the air piston. Clean the air piston.
Apply grease and install a new o-ring. Apply grease and install a new o-ring.
11
Apply a liberal amount of grease evenly around the end of a clean Apply a liberal amount of grease evenly around the end of a clean
plastic dowel, approximately 60 mm from one end. Use the dowel to plastic dowel, approximately 60 mm from one end. Use the dowel to
apply the grease to the inside surface of the upper tube, approximately apply the grease to the inside surface of the upper tube, approximately
60 mm into the tube. 60 mm into the tube.
21
Solo Air Spring Service