Opening The Housing - Fantasea Line FA6000 Instruction Manual

against the lens port. Make sure not
to scratch the lens port using the lens
port opening tool.
f. Separate the lens port from the
housing by pulling it out and away
from the housing.
g. Note that it is recommended to store
the lens port separated from the
housing during transportation and
storage.
h. To protect the housing during
storage and transportation, it is
recommended to mount the body
cap on the housing lens port hole
and secure it by turning it clockwise.

OPENING THE HOUSING

1. Pull the small red tab located at the bottom of the latch dial outwards (up and away from the
housing), as indicated by the arrow direction (image #19). There is no need to apply any force.
2. While holding the lock dial up, turn the latch dial counterclockwise until the red latch tab is
located at the top of the latch and cannot be turned any farther (image #20). There is no need to
apply any force.
Image #19
Image #18
Image #20
FA6000 Housing Instruction Manual 20190204
23