Led Flash Triggers; Flash & Video Lighting Sets; Interchangeable Lens Ports - Fantasea Line FA6000 Instruction Manual

Housing for sony a6000

Table of Contents

9. Follow the instructions in your strobe manual on how to synchronize your camera with the external

flash and to select the proper pre-flash program for your camera. It is recommended to test the

synchronization when photographing opposite a mirror. In this case, the output of the slave flash

should be visible in the test shot taken.

10. Note that an optional LED Flash Trigger can be used to trigger the slave flash instead of being

triggered by the camera built-in flash. See "Led Flash Trigger" section for further information.

Electronic Strobes

Electronic strobes can be attached to the housing using electronic sync cords. These sync cord connect to

the housing electronic strobe bulkhead (separately purchased), which connects to the camera hot-shoe.

The FA6000 Housing features an M16 Accessory Port, which allows for the installation of an electronic

strobe bulkhead in the housing. Note that such a bulkhead should be separately purchased. For further

information, visit our website –

LED FLASH TRIGGERS

The FA6000 Housing features two dedicated ports inside the housing, which were designed to allow the use

of an optional LED Flash Trigger. The LED Flash Trigger is a useful accessory when making use of slave

flashes connected to the housing with fiber optic cables. It attaches to the camera hot-shoe on one end and

to the two LED Trigger Ports on the other end. When an image is captured, the device LEDs installed inside

the LED Trigger Ports trigger the slave strobe without activating the camera built-in flash. This spares

camera battery consumption and also prevents the built-in flash recycle time from limiting continuous

shooting.

For LED Flash Triggers available, please visit the Fantasea website –

FLASH & VIDEO LIGHTING SETS

A variety of Fantasea flash and video lighting sets are available for the FA6000 Housing, enabling you to

further enhance your images and videos. These sets include trays, arms, strobes, video lights, focus lights

and more.

The housing features an FML interchangeable lens port system, which allows using a wide range of lenses

underwater. The housing is compatible with any FML lens port, as well as other lens ports available in the

market. For compatibility information, please visit the FA6000 Housing page on the Fantasea website –

www.fantasea.com

FA6000 Housing Instruction Manual 20190204

Table of Contents