Opening The Housing - Fantasea Line FRX100 VA R Instruction Manual

OPENING THE HOUSING

Important Notice
1. Pull the small red tab located at
housing), as indicated by the arrow direction (image # , as indicated by the arrow direction (image #5). There is no need to apply any force.
2. While holding the lock dial up, turn the latch ing the lock dial up, turn the latch dial counterclockwise until the red latch tab is
located at the top of the latch and cannot be turned any further (image #6). There is no need to located at the top of the latch and cannot be turned any
apply any force.
3. Carefully open the back side of the housing. Carefully open the back side of the housing.
4. Note that when opening the housing for the f Note that when opening the housing for the first time or when opening it after airplane trips
increased resistance might be encountered. Therefore, it is important not to lock the housing increased resistance might be encountered.
and to leave it slightly open when transporting by air. and to leave it slightly open when transporting by air
Prior to opening a vacuumed housing, the vacuum should be released Prior to opening a vacuumed housing, the vacuum should be released Prior to opening a vacuumed housing, the vacuum should be released
using the Vacuum Valve. For further instructions, please refer to the using the Vacuum Valve. For further instructions, please refer to the using the Vacuum Valve. For further instructions, please refer to the
section "Fantasea Hybrid Vacuum Safety System". section "Fantasea Hybrid Vacuum Safety System".
at the bottom of the latch dial outwards (up and
Image #5
There is no need to apply any force.
until the red latch tab is
FRX100 VA R Housing Instruction Manual
15
up and away from the
There is no need to
Image #6 Image #
after airplane trips,
not to lock the housing
Instruction Manual 20200225