Fantasea Line FA6000 Instruction Manual page 9

13. Lanyard Loops – The 3 lanyard loops featured on the housing (one loop at the bottom of the axis side
of the housing and two top and bottom loops at the opposite side of the housing) are used to attach
a Hand Lanyard or Hand Strap to the housing, as well as to secure accessories using snap cords or
secure strings.
14. Latch Dial Lock – Ensures the secure dial doesn't accidently open during the dive. For further
instructions, please refer to the sections "Opening the Housing" and "Closing the Housing".
15. Latch Dial – When locked fully into place, this dial ensures the housing is properly closed and
watertight sealed. For further instructions, please refer to the sections "Opening the Housing" and
"Closing the Housing".
Housing View #2 – Front -
18. Lens Release Control
Corresponding numbered descriptions are listed on the following page
17. Tripod Mounting Screw Holes
(bottom of housing)
FA6000 Housing Instruction Manual 20190204
9
16. Lens Port Lock