Opening The Housing - Fantasea Line FA6500 V2 Instruction Manual

g. Note that it is recommended to store the lens port separated from the housing
during transportation and storage.
h. To protect the housing during storage and transportation, it is recommended to
mount the body cap on the housing lens port hole and secure it by turning it
clockwise.

OPENING THE HOUSING

Important Notice
1. Pull the small red tab located at the bottom of the latch dial outwards (up and away from the
housing), as indicated by the arrow direction (image #38). There is no need to apply any force.
2. While holding the lock dial up, turn the latch dial counterclockwise until the red latch tab is
located at the top of the latch and cannot be turned any farther (image #39). There is no need to
apply any force.
Image #38
3. Carefully open the back side of the housing.
Prior to opening a vacuumed housing, the vacuum should be released
using the Vacuum Valve. For further instructions, please refer to the
section "Fantasea Hybrid Vacuum Safety System".
Image #39
FA6500 V2 Housing Instruction Manual 20190402
30