Parallel Port; Parallel Port Mode - AOpen DP5 User Manual

·
338H, 238H
The default settings are

Parallel Port

This parameter controls the onboard parallel port connector. The
options for this parameter are:
·
378H
·
3BCH
·
278H
·
Disabled
The default setting is 278H
If you are using an I/O card with a parallel
port, make sure that the addresses don't
conflict.

Parallel Port Mode

The default setting for this function is
parallel interface peripheral device, set this function according to the
enhanced mode that your device supports. The available options are:
·
Normal
·
EPP (Enhanced Parallel Port)
·
ECP (Extended Capabilities Port)
·
ECP+EPP
User's Guide
Award BIOS
338H and 238H .
.
Normal . If your system has a
3-21